This project is mirrored from https://github.com/coreboot/coreboot.git.
Pull mirroring failed .
Last successful update .
Last successful update .
- 08 Feb, 2010 5 commits
-
-
Stefan Reinauer authored
Signed-off-by:
Stefan Reinauer <stepan@coresystems.de> Acked-by:
Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5096 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
-
Stefan Reinauer authored
Signed-off-by:
-
Patrick Georgi authored
- unify all iasl related rules into the toplevel Makefile - build a filesystem standard for ACPI files and use it - pass ACPI sources through cpp, so constants can be shared between C and ACPI more easily - use cpp's #include instead of ACPI's Include() so cpp gets the whole picture Signed-off-by:
-
Stefan Reinauer authored
Apparently they are not used. If you have any of the boards touched in this commit, please test and report (so we can figure out what to do with the ap_romstage.c files in general) Signed-off-by:
-
Stefan Reinauer authored
cache_as_ram_auto.c and auto.c are both called "romstage.c" now. Signed-off-by:
-
- 07 Feb, 2010 3 commits
-
-
Stefan Reinauer authored
our parallel build server ;-) Signed-off-by:
-
Patrick Georgi authored
Signed-off-by:
-
Patrick Georgi authored
Signed-off-by:
Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5089 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
-
- 05 Feb, 2010 2 commits
-
-
Stefan Reinauer authored
Signed-off-by:
-
Stefan Reinauer authored
Signed-off-by:
-
- 04 Feb, 2010 6 commits
-
-
Harald Gutmann authored
Signed-off-by:
Harald Gutmann <harald.gutmann@gmx.net> Acked-by:
-
Stefan Reinauer authored
Signed-off-by:
-
Harald Gutmann authored
and fix the build. Change the default ROM size to 1MB Signed-off-by:
-
Ward Vandewege authored
Revision 5051 broke Kconfig booting for the Tyan s2881 board. Up to 5050, there were two SB_HT_CHAIN_ON_BUS0 sections in the mainboard Kconfig file - one setting the parameter to 0, the other setting it to 2. Revision 5051 removed one of the two SB_HT_CHAIN_ON_BUS0 sections - the wrong one. This patch fixes that. Revision 5051 removed the wrong setting because newconfig for this board was *also* wrong. This patch fixes that too. Tested on real hardware, both with Kconfig and newconfig. Signed-off-by:
Ward Vandewege <ward@gnu.org> Acked-by:
-
Stefan Reinauer authored
This automatically adds the settings for those boards that didn't have settings at all yet. Also, small fixup to compareboard. Signed-off-by:
-
Uwe Hermann authored
This Super I/O doesn't seem to know the concept of LDNs, it's just a bunch of registers not splitted into banks/LDNs. Signed-off-by:
Uwe Hermann <uwe@hermann-uwe.de> Acked-by:
-
- 03 Feb, 2010 7 commits
-
-
Uwe Hermann authored
This makes the code more similar to the h8dmr_fam10 target in order to make the diff between both smaller and more readable. Build-tested with newconfig and kconfig. Signed-off-by:
-
Uwe Hermann authored
Signed-off-by:
-
Patrick Georgi authored
(fixed buildtarget) Signed-off-by:
-
Patrick Georgi authored
- if crt0s is empty (eg. because crt0-y is still used), break the build, and say where that behaviour changed - if a stage is unusable for cbfstool because it's placed outside the ROM space (linked to 0 is somewhat notorious), warn about it, give some hints and exit instead of crashing. Signed-off-by:
Stefan Reinauer <stefan.reinauer@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5077 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
-
Uwe Hermann authored
Signed-off-by:
-
Knut Kujat authored
following remaining issues: - ACPI not working - SMBus gets irq 0 instead of 5 - Loading VGA rom fails (using seabios to do it) (copied a newer Makefile.inc from h8dmr_fam10 vs. the patch on the list) Signed-off-by:
Knut Kujat <knuku@gap.upv.es> Acked-by:
-
Stefan Reinauer authored
GPIO lines 4 and 3 are swapped and also incorrectly put in IR mode receive (compound fault). Signed-off-by:
Edwin Beasant <edwin_beasant@virtensys.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5074 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
-
- 01 Feb, 2010 1 commit
-
-
Joseph Smith authored
Signed-off-by:
Joseph Smith <joe@settoplinux.org> Acked-by:
-
- 31 Jan, 2010 3 commits
-
-
Stefan Reinauer authored
- disallow REAL_MODE method if ARCH_X86 is not set. Signed-off-by:
-
Stefan Reinauer authored
- drop all occurences of LOGLEVEL settings. - drop CONFIG_CPU_[VIA|INTEL|AMD] because they're Kconfig only. - re-enable CONFIG_IOAPIC for now, it might need some fixing. Signed-off-by:
-
Uwe Hermann authored
Signed-off-by:
-
- 30 Jan, 2010 5 commits
-
-
Joseph Smith authored
Signed-off-by:
-
Stefan Reinauer authored
Signed-off-by:
-
Stefan Reinauer authored
Signed-off-by:
-
Stefan Reinauer authored
use -o/--oldconfig to get the old behavior (and use that option in kbuildall to get the old config) I changed the qa.coreboot.org autobuild system to use -o for now so we get build reports from the old and new config, still. Signed-off-by:
Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5066 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
-
Stefan Reinauer authored
* fix iasl output directory for i945 boards (patch for moving it to the mainboard directory will follow) * coreboot_table.c: lb_mainboard can be static * coreboot_table.c: dump memory table in debug and spew mode * fix a warning in bootblock.c * don't include arch/i386/init in arch/i386/Makefile.inc * announce generation of crt0_includes.h * allow overriding $(obj) * drop unused src_types from Makefile * correctly use hostname -s instead of hostname for COMPILE_HOST Signed-off-by:
-
- 29 Jan, 2010 3 commits
-
-
Joseph Smith authored
Signed-off-by:
-
Patrick Georgi authored
if there's no native getopt around. Use $PATCH instead of the hardcoded "patch" for patching files (after we already looked it up) Ignore various temporary files via svn:ignore Signed-off-by:
-
Patrick Georgi authored
object files, as it's dragged into the build by -include $(obj)/build.h for pretty much everything. Also, generate build.h atomically. This fixes parallel build with kconfig on my box. Signed-off-by:
-
- 28 Jan, 2010 1 commit
-
-
Uwe Hermann authored
Without this patch the manual newconfig (not kconfig) build would fail with: #error "CONFIG_XIP_ROM_BASE is not a multiple of CONFIG_XIP_ROM_SIZE" I tested an image on hardware, it starts booting now, but doesn't fully succeed as there are other issues (I'm investigating). Signed-off-by:
-
- 27 Jan, 2010 3 commits
-
-
Patrick Georgi authored
Signed-off-by:
-
Edwin Beasant authored
Add appropriate Kconfig defines to provide 8mb of VGA ram allocation Add the Kconfig defines to cover TSC calibration from TIMER2 and UDELAY setup Two small warning removals about excessive prototyping. Signed-off-by:
-
Edwin Beasant authored
single range. This change allows both seabios and filo to boot linux successfully (which was confused before) Signed-off-by:
-
- 26 Jan, 2010 1 commit
-
-
Edwin Beasant authored
a0000-bffff might be usable as well, but it won't hurt to keep that range excluded. Signed-off-by:
-
